Manual Setting - Sangean RCR-20 Mode D'emploi

Manual setting

When choosing manual setting as the clock time setting of your radio, the Radio Data System (RDS)
function will be disabled.
1. Press and hold the Info/Menu button to enter the menu setting.
2. Rotate the Tuning control knob until a clock symbol appears on the left side display, then press
and release the Tuning control button to enter the setting. Rotate the Tuning control knob until
"MANUAL" appears on the display, then press and release the Tuning control button to select the
setting.
3. Rotate the Tuning control knob until "CLOCK ADJ" appears on the display. Press and release the
Tuning control button to enter the setting.
4. The hour setting on the display will begin flashing. Rotate the Tuning control knob to select the
desired hour, and press and release the Tuning control button to confirm the setting. Then rotate
the Tuning control knob to select the desired minute, and press and release the Tuning control
button to confirm the setting.
5. Rotate the Tuning control knob until "DATE ADJ" appears on the display. Press and release the
Tuning control button to enter the setting.
6. Rotate the Tuning control knob to select the desired year, and press and release the Tuning control
button to confirm the setting. Then rotate the Tuning control knob to select the desired month, and
press and release the Tuning control button to confirm the setting. Then rotate the Tuning control
knob to select the desired date. Press and release the Tuning control button to confirm the setting
and the radio will beep once.
17