Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
15
Self-test function
MultiWet-Master Compact
16
Instruction for use - resistance measuring principle
16.1
Measuring material moisture
MultiWet-Master Compact
Be sure neither supply lines (electric lines, water pipes, etc) nor a metal subsur-
face is present at the location to be measured. Insert the electrodes as far into
the material as possible but never use excessive or sudden impact force as
this could damage the device. Always pull the device out of the material with
left/right twisting motion. Perform several comparative measurements
at different locations to minimise measurement error. The sharply pointed
electrodes present an injury hazard. Always put the safety cap on the device
when it is not in use or being transported.
MultiWet-Master Compact Plus
2 sec
11x
1.
+
1.
2.
2.
29
EN
Publicité
Table des Matières
