Safety Instructions; Insert Battery - LaserLiner MultiWet-Master Compact Plus Mode D'emploi

Safety instructions

Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limits in accordance with the EMC Directive 2014/30/EU
which is covered by the Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply. Electronic
devices can potentially cause hazards or interference or be subject to hazards
or interference.
– The measuring accuracy may be affected when working close to high
voltages or high electromagnetic alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility and wireless
radiation regulations and limits in accordance with the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the MultiWet-Master Compact
Plus radio equipment complies with the essential requirements and other
provisions of the European Radio Equipment Directive 2014/53/EU (RED).
The EU Declaration of Conformity can be found in its entirety at the following
address: http://laserliner.com/info?an=muwemacopl
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure
it produces accurate measurement results. We recommend carrying out
calibration once a year.
1

Insert battery

Open the battery compartment on
the housing's rear side and insert
a 9V battery (6LR61 9V). Correct
polarity must be observed.
2
ON
MultiWet-Master Compact Plus
1.
MultiWet-Master Compact
2.
3
OFF
2 sec
3.
MultiWet-Master Compact
19
EN