Falling Prevention; Speaker Connections To Tvs - Sharp HT-SB500 Mode D'emploi

Masquer les pouces Voir aussi pour HT-SB500:
Table des Matières

Publicité

Falling prevention

Safety wires (not supplied) are useful to prevent the speaker
from falling off the table.
Loop the safety wires (not supplied) into each hole as shown
and tie the safety wires to the LCD TV stand.

Speaker connections to TVs

Caution:
Turn off all other equipment before making any connections.
Tuner receiving for other audio system
Placing the aerial near the speaker AC power lead may cause
noise pick up. Place the aerial away from the speaker for
better reception.
Notes:
To connect to TV, use either LINE IN 1 sockets or AUDIO
LINE IN 2 socket only.
Refer the operation manual of the equipment to be
connected.
Fully insert the plugs to avoid fuzzy pictures or noises.
HT-SB500
ENGLISH
E-10

Publicité

Table des Matières
loading

Table des Matières