Control Panel - Gaymar Air Express Mode D'emploi

®
Air Express

Optional Foot Stop/ZIP™ cell to minimize heel interface pressure while maintaining appropriate
positioning of feet. Contact your dealer for ordering information

Removable cells for greater flexibility and easy maintenance

8.0 Control Panel


POWER ON/OFF SWITCH on side of unit

LIGHTED MODE SELECT SWITCH toggles between operating modes (Float/Static or Alternating
Low Pressure)
• FLOAT/STATIC MODE (
when this function is selected. Mode Select Switch light is OFF when this mode is activated.
• ALTERNATING LOW PRESSURE MODE (
be alternately inflated and deflated in this mode. Mode Select Switch light is ON when this mode
is activated.

COMFORT CONTROL DIAL adjusts for patient comfort
• SOFT (
• FIRM (

LOSS OF PRESSURE WARNING LIGHT (

POWER ON LIGHT (

LIGHTED ALARM SWITCH will activate ( –Alarm Switch ON) or deactivate (
OFF) all audible and visual alarms.
• If power cord is disconnected with unit ON and alarm switch activated (
and flash intermittently. To avoid inadvertent Power Fail Alarm, turn the unit off before
disconnecting power.
• If there is a loss of mattress/overlay pressure with the unit ON and alarm switch activated (
an Alarm will sound and flash intermittently. In addition, the Loss of Pressure Warning Light
(

The Audible Low Pressure Alarm is not active during initial mattress or overlay inflation. The
Audible Low Pressure Alarm is active after approximately 50 minutes has elapsed from the
time the unit has been turned on.

Always leave the Alarm Switch in the ON position to activate the audible and visual Loss of
Pressure Alarm and the Loss of Power Alarm.
)
—Minimum inflation level of the mattress/overlay
)
—Maximum inflation level of the mattress/overlay
I
)
) will be illuminated.
C1000DF Control Panel
)
—All cells within mattress/overlay will be uniformly inflated
)
—Adjacent cells within mattress/overlay will
)
CAUTION
6
– Alarm Switch
)
, an Alarm will sound
)
,