Confirming The System Log Message Of This Unit (Syslog) - Yamaha PJP-100H Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Confirming the System Log Message of This Unit (Syslog)

You can send information or the event which occurs in the system of this unit to another unit as a message (this is called
"Syslog"). "Syslog" contains information of such as start/shut down of this unit, login, the activity in normal states, the
states of an error. You can specify the level of the message if necessary.
1
In the Web menu, click "Syslog Setting".
The "Syslog" window appears.
2
Select the desired mode(s) which specifies
the kind of the message that is sent and
click.
y
You can check marks of multiple modes to send all checked
messages.
•Debug Mode: Send the debug log to confirm the
inner activity when an error occurs.
•Info Mode (default setting): Send the operation log
such as the event or states of the activity of this
unit.
•Notice Mode: Send the details of the operation log
when this unit is in the normal state.
3
In the "Syslog Network Output", click
"Enable".
4
In the "Syslog Host Address", enter the host
IP address of the destination unit.
5
Click "Submit".
The syslog message specified in step 2 is sent to the
host address specified in step 4.
41

Publicité

Table des Matières
loading

Table des Matières