Power Failure Alarm - Atag KD85178AF Mode D'emploi

OPERATING THE APPLIANCE

Power failure alarm

Always check the food in the appliance when 'PF' is shown in the display! Food can spoil
at a temperature that is too high.
Stopping the alarm
1. Touch any key to stop the alarm.
The alarm will stop sounding.
▷
▷ The set temperature will be shown again in the display.
▷ The alarm key and the set temperature shown in the display continue to flash while the
temperature is still too high.
When the alarm is not stopped manually then the signal will sound for the first minutes of
every half hour and when the door is opened.
The appliance cannot cool/freeze during a power failure. Once the
power has been restored, the temperature in the appliance will be
measured. A signal will sound when the temperature in the appliance is
too high. The alarm key will flash and 'PF' (Power Failure) will be shown
in the display.
EN 27