Starting; Setting Up The Duratec Pos S15 - Duratec POS S15 Mode D'emploi

3. S t ar t ing
Your Vectron specialist retailer has programmed the
Duratec POS S15 for you. If necessary, he will be glad to support
you during initial start-up and will train you in using your POS
system.
3 .1 . S e t ti n g u p th e D u ra te c P OS S15
3 .1 .1 . S e l e c ti n g th e s e tu p si te fo r th e
D u ra te c P OS S15
• Set up the Duratec POS S15 in a well-ventilated room
with a temperature between 0 and 40 °C.
• The Duratec POS S15 must not be covered during
operation.
• Select the setup site so that the Duratec POS S15 is not
exposed to direct sunlight.
• Place the Duratec POS S15 on a stable, even surface
with sufficient space.
• Make sure that no liquids can flow over the
Duratec POS S15 , the power supply unit or the mains
cable.
• Route the cables so that they are not subjected to
tensile stress.
• Route the cables so that no one can trip over them.
D
EN
27