Factory Preset Timings; Signal Connector Pin-Outs; 15-Pin Mini D-Type Male Connector; Troubleshooting - Atlantis Land A05-15AM-E01 Manuel D'utilisation

5.1

Factory Preset Timings

Timing
VGA 720 X 400
VESA 640 X 480
VESA 640 X 480
VESA 640 X 480
VESA 800 X 600
VESA 800 X 600
VESA 800 X 600
VESA 1024 X 768 48.363
VESA 1024 X 768 56.476
VESA 1024 X 768 60.023
6

Signal Connector Pin-outs

To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector.
6.1

15-pin Mini D-type Male Connector

1 Red Video 6 Red Ground
2 Green Video 7 Green Ground 12
3 Blue Video 8 Blue Ground
4 Ground 9 No Connection 14
5 No Connection 10 Sync Ground

Troubleshooting

7
CAUTION: Never disassemble the monitor or attempt to service the product yourself. This will
also void warranty. Contact the Atlantis Help Desk Center (see the Warranty Certificate)
•
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on. Turn off the power and check the monitor's
power cord, AC adapter, and signal cable for proper connection.
•
Appear the " No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
•
Appear the " Input Not the Supported"
Input signal are insuperable, refer the "Video Modes"
•
The appearance is not at the screen center.
A05-15AM-E01_X02
Horizontal Vertical Sync
Frequency Frequency Polarity
(KHz) (Hz) (H/V)
31.467 70.082 - / +
31.469 59.940 - / -
37.861 72.809 - / -
37.500 75.000 - / -
37.879 60.317 + / +
48.077 72.188 + / +
46.875 75.000 + / +
60.004 - / -
70.069 - / -
75.029 + / +
11 Ground
Serial Data/I/O
13 H. Sync
V. Sync
15 Serial Clock Input
ENGLISH
12 - 44