Other Function; Exit; Various; Mounting The Monitor - Atlantis Land A05-15AM-E01 Manuel D'utilisation

OSD V. Position:
OSD Timer:
Translucent:

Exit:

3.6

Other Function

Press ◄► button choice and MENU button to enter OSD menu
Volume:
Exit
3.7 EXIT
If you choose EXIT , press MENU button to exit main menu
4

Various

4.1

Mounting the monitor

You can install the monitor onto a swing arm or other mounting
fixture that is compliant with the VESA (Video Electronics
Standards Association) standard.
Before mounting the monitor, you must remove the monitor
from its base.
Remove the hinge cover by prying from the bottom part of
the cover.
Remove four screws to detach the monitor from the base.
•
To mount the monitor, follow the instructions supplied
with the mounting fixture.
CAUTION: Use an UL listed VESA arm only, or it might result
in malfunction and may cause damage to your monitor.
Please make sure the VESA arm or wall-mounted arm is
adjusted by an authorized LCD agent. Maladjustment can
cause damage to your LCD panel.

Tilting the Display

4.2
Caution:
•
Do not touch the screen when you tilt the LCD.
•
Do not tilt the LCD beyond the allowed angles when
tilting forward or backward, or the LCD may fall or be
damaged.
•
Do not place your fingers on the front of the hinge
arm. Doing so may hurt your fingers when tilting.
For viewing clarity, you can tilt the LCD forward (up to 3
degrees) or backward (up to 25 degrees).

4.3 Packing the Monitor

You need to tilt the monitor to the horizontal position when
packing it into a carton.
A05-15AM-E01_X02
adjust OSD V. Position
adjust OSD timer
adjust OSD translucent
Return to main MENU
adjust speaker volume
Return to main MENU
ENGLISH
10 - 44