Dimplex CDFI-BX1500 Manuel Du Propriétaire page 11

Installation
13. Within the junction box connect
the green wires (ground) from
the Opti-Myst cassettes and the
Opti-Myst Pro Box Heater to the
ground from the power supply.
Then within each cassette,
connect the green wires from the
junction box to the ground from
the Opti-Myst Cassette.
(Figure 7)
CAUTION:
connectors are securely
tightened, so no bare wires (live
or neutral) are exposed.
14. Place all connections inside the
junction box and resecure the
top.
Figure 8
Ensure the wire
15. Place all cassette connections
inside the Opti-Myst cassettes
and secure the electrical cover
plates.
16. Connect the 2 pin connector
from the CDFI500-Pro Opti-Myst
cassette to the Opti-Myst Pro
Box Heater. (Figure 8)
11