Cancelling A Print Job - HP LineJet Série Guide De Référence Rapide

Cancelling a Print Job

The purpose of this function is to stop the printing of unwanted data
when print jobs are cancelled from the host system.
This first procedure only clears all the data in the buffer and does
not change the current configuration.
1.
Place the printer offline.
2.
From the host system, stop the print job.
3.
Simultaneously press the ENTER + CLEAR keys.
This second procedure clears all data in the buffer and returns the
printer to the power-up configuration. The result is the same as
powering the printer off and then on.
1.
Place the printer offline.
2.
From the host system, stop the job.
3.
Simultaneously press the PREV + NEXT keys to reboot the
printer.
Note If the print job is not stopped from the host system before
cancelling data or rebooting the printer, the print job will continue
with data missing when the printer returns online. Exercise
caution to prevent unwanted data loss occurrences as this
function is active only in an offline condition and sets the current
paper position as the top-of-form. The purpose of this function is
to eliminate the necessity of printing unwanted data when print
jobs are cancelled.
Cancelling a Print Job
57