Precautions; Handling The Lcd Screen - Sony SDM-V72W Mode D'emploi

Masquer les pouces Voir aussi pour SDM-V72W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Precautions

Warning on power connections
Use the supplied power cord. If you use a
different power cord, be sure that it is
compatible with your local power supply.
If you do not use the appropriate cord, this
display will not conform to mandatory FCC
standards.
for 100 to 120 V AC
for 200 to 240 V AC
For use only with AC adapter, Sony AC-DP001
The equipment should be installed near an
easily accessible outlet.
Installation
Do not install or leave the display:
In places subject to extreme temperatures, for
example near a radiator, heating vent, or in
direct sunlight. Subjecting the display to high
temperatures, such as in an automobile
parked in direct sunlight, could cause
deformations of the casing or malfunctions.
In places where the display may tip and fall,
such as locations subject to any vibration or
shock or an unstable surface.
Near any equipment that generates a strong
magnetic field, such as a TV or various other
household appliances.
In places subject to inordinate amounts of
dust, dirt, or sand, for example near an open
window or an outdoor exit. If setting up
temporarily in an outdoor environment, be
sure to take adequate precautions against
airborne dust and dirt. Otherwise irreparable
malfunctions could occur.
In places where the display may come in
contact with extreme moisture or liquid, such
as in bathroom or area near pool. Avoid
placing glasses or cups on top of the display
that may cause liquid to spill inside.
- 3 -

Handling the LCD screen

Do not leave the LCD screen facing the sun as
it can damage the LCD screen. Take care when
you place the display by a window.
Do not push on or scratch the LCD screen. Do
not place a heavy object on the LCD screen.
This may cause the screen to lose uniformity or
cause LCD panel malfunctions.
If the display is used in a cold place, a residual
image may appear on the screen. This is not a
malfunction. The screen returns to normal as
the temperature rises to a normal operating
level.
If a still picture is displayed for a long time, a
residual image may appear for a while. The
residual image will eventually disappear.
The LCD panel becomes warm during
operation. This is not a malfunction.

Publicité

Table des Matières
loading

Table des Matières