Final Shutdown - Daikin Altherma EHS04P30B Instructions D'installation Et D'utilisation

6.2 Final shutdown

WARNING!
Cooling systems (heat pumps), climate
control systems and heating devices that
are incorrectly dismantled can both en-
danger the life and health of people and
exhibit impaired function during start-up.
Work on the Daikin Altherma
EHS(X/H) (such as dismantling
components, temporary or final
shutdown of system) is only to be
carried out by persons who are
authorised and who have successfully
completed qualifying technical or
vocational training for the specific
activity and who have taken part in
advanced training sessions recog-
nised by the relevant responsible
authorities. These include, in
particular, certified heating
engineers, qualified electricians
and HVAC specialists, who on
account of their professional
training and expert knowledge,
have experience in the professional
installation and maintenance of
heating, cooling and air conditioning
systems and heat pumps.
You must observe the warning and
safety instructions in the installation
manual on working in the coolant
system.
A final shutdown may be necessary if
– the system is defective and is being dismantled and disposed
of.
– components of the system are defective, are being disman-
tled and replaced.
– the system or parts of the system are being dismantled and
reassembled in another location.
The Daikin Altherma EHS(X/H) is designed to be environmentally
friendly and easy to install: the jobs described above can
therefore be carried out in an efficient and environmentally-
friendly manner.
When changing location or replacing parts on the coolant system
in the pipe network:
Pump the coolant back into the external heat pump unit
(see installation and operating guide for the particular
external heat pump unit).
When disposing of the machine or replacing parts in the coolant
system:
Suction the coolant from the machine and recycle
(see installation and operating guide for the particular
external heat pump unit).
Daikin Altherma EHS(X/H)
Daikin Altherma integrated solar unit
008.1441399_02 – 01/2021 – EN
6
CAUTION!
Coolant escaping from the system
causes long-term damage to the envi-
ronment.
Mixing different kinds of coolant can
result in hazardous toxic gases being
released. Mixing with oils when coolant
escapes can lead to the soil being con-
taminated.
Never allow coolant to be released
into the atmosphere - always suction
it off and recycle using a suitable
recycling device.
Always recycle coolant, in so doing
keeping it separated from oils and
other additives.
Only store different types of coolant
separately, in suitable pressure
vessels.
Dispose of coolants, oils and
additives properly and in accordance
with the applicable national regula-
tions of the country it is being used in.
Decommissioning a Daikin Altherma EHS(X/H)
(see section 6.1).
Disconnect the Daikin Altherma EHS(X/H) from all electrical
connections, refrigerant and water connections.
Dismantle the Daikin Altherma EHS(X/H) or components in
accordance with the installation guide in reverse order.
Daikin Altherma EHS(X/H) disposed off in a professional
manner.
Recommendations for disposal
The Daikin Altherma EHS(X/H) has an environmentally friendly
design. During the disposal process, the only waste created is
that which can be used for material or thermal recycling. The ma-
terials used that are suitable for recycling can be sorted into indi-
vidual types.
Daikin has complied with the standards for environmen-
tally-friendly disposal as a result of the environmentally-
friendly design of the Daikin Altherma EHS(X/H).
Proper disposal in compliance with the respective
national regulations of the country of use is the respon-
sibility of the user/owner.
x Decommissioning
Installation and operating instructions
47