Maintenance And Transport - Seac R20 Mode D'emploi

MAINTENANCE AND TRANSPORT

It is important to abide by the following instructions:
• Always transport the torch in a bag that will protect it from any blows.
• When you aren't using the torch, always make sure you have fully inserted
the safety in order to prevent the torch from switching on accidentally,
which could cause fires. For extended transport in the trunk or hold, it's
good practice to always remove the batteries from the torch. This provision
may be mandatory with certain airlines.
• Avoid prolonged exposure to the sun.
• After a dive (sea, lake, or pool), always rinse with fresh water and dry.
• Check the condition of the gaskets (O-rings) every time you open the body
of the torch.
• Clean and grease the parts involved in opening the torch with silicone
grease.
• Avoid cleaning the torch with products containing chlorine (sodium
hypochlorite/bleach, etc.), aggressive surfactants (such as degreasers), or
solvents to avoid damaging the rust protectant anodic treatment, the plastic
parts, and the sealing gaskets.
• It is advisable to have your product inspected annually by an authorised
SEAC center.
SEAC declines all responsibility for damage caused to the user resulting
from improper use of equipment. The same is true of direct or indirect
damage of any kind caused to people or things resulting from any periods
of disuse of the product or incorrect use of the same.
20
797 - Manuale Seac torce serie R20 R30 R40 - TOTALE.indb 20 11/09/2018 10:50:21