Seac R20 Mode D'emploi page 18

If the battery is inserted incorrectly (inverted polarity), a short circuit
will be created, causing irreversible damage and a risk that the torch
could explode.
SWITCH
The torch has a sliding magnetic switch with three positions: 100% light
output, low power setting (30% of maximum power), and flashing.
ENGAGING OR DISENGAGING THE SAFETY
The torch features an exclusive and effective safety system, designed to
prevent the torch from switching on accidentally. To insert the safety, rotate
the circular ring nut right below the switch as far as it can go. The pointer
engraved into the ring nut will line up with the closed lock icon. The switch will
be locked. To disengage the safety, simply turn the ring nut the other way until
the pointer lines up with the open lock icon. In the position the switch is not
secured and is operative.
PRE-DIVE INSPECTION
• If your torch has not been used recently, check the condition of the batteries
by ensuring that it switches on.
• Check that the body is fully closed.
• As soon as you enter the water, check that no bubbles emerge from the
body of the torch.
18
797 - Manuale Seac torce serie R20 R30 R40 - TOTALE.indb 18

WARNING
11/09/2018 10:50:20