Anti-Freeze Resistance And Compressor Phases Alarm Digital Outputs; Evaporator Pump Digital Outputs; Solenoid Valves Digital Outputs - AERMEC NXW Série Manuel D'utilisation

INPUTS/OUTPUTS menu - Anti-freeze resistance and compressor phases alarm digital outputs
Visualisation on unit display
A
Input/Output
B
Master digital output
C
07= Antifreeze heater:
D
08= ASerius alarm:
INPUTS/OUTPUTS menu - Evaporator pump digital outputs
Visualisation on unit display
A
Input/Output
B
Master digital output
C
09= Evaporator pump 1:
Visualisation on unit display
A
Input/Output
B
Master digital output
C
10= Liquid solenoid 1:
D
11= Liquid solenoid 2:
Index
Close
Open
Index
Open
INPUTS/OUTPUTS menu - Solenoid valves digital outputs
Index
Close
---
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C 07: indicates the status of the digital output linked to the anti-
freeze resistance. The status of this output can be one of the
following:
• Closed = normal functioning
• Open = Anti-freeze alarm active;
D 08: indicates the status of the digital output linked to the com-
pressor phases alarm. The status of this output can be one of
the following:
• Closed = compressor phases alarm in progress;
• Open = no alarm in progress;
A Inputs/Outputs: Indicates the state of the different entries/
exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C 09: indicates the status of the pump indicated, the status of
this output can be one of the following:
• Closed = pump ON;
• Open = pump OFF;
A Inputs/Outputs: Indicates the state of the different entries/
exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C/D 10-11: indicates the status of the solenoid valves indicated,
the status of this output can be one of the following:
• Closed = valve ON;
• Open =valve OFF;
• --- = valve not present;
Display/Parameter
Display/Parameter
Display/Parameter
17