Clock/Period Menu Parameters; Setting The System Date And Time; Setting The Daily Time Periods - AERMEC NXW Série Manuel D'utilisation

CLOCK/PERIOD MENU parameters

Visualisation on unit display
A
Clock
B
Day:
C
Date:
D
Hour:
Parameters that can be modified
by the user
Visualisation on unit display
A
Clock
B
Day:MONDAY
C
Copy to:MONDAY
Cool
1: 08:30 SET1
2: 22:00 SET1
3: 23:00
4: --:--
D
Parameters that can be modified
by the user
CLOCK/PERIOD menu - Setting the system date and time
Monday
gg/mm/aa
29/03/10
12:04
CLOCK/PERIOD menu - Setting the daily time periods
NO
Heat
SET1
SET1
OFF SET1
--- ---
E F
Index
A Clock: Indicates the date and time of the system
B Day: indicates the day of the week (on the basis of system set-
tings).
C Date: Indicates today's date.
D Time: indicates the current time.
Index
A Clock: Indicates the date and time of the system
B Day: indicates the day of the week to which the time periods
refer, set in the same page.
C Copy to: Indicates the possibility of copying the time period set-
tings of the day selected in the field (B), also for the other days
(thus preventing having to repeat the same insertion). This
option can be used to copy the settings in a single day (select-
ing the desired day) or for every day of the week.
D Start time period: indicates the start time of the various time
periods (maximum 4 periods daily). It is only specified at the
start of the time period as it is considered that the end of a
time period coincides with the start of the successive one.
E / F Cooling/Heating: indicates the setting used during the spe-
cific time period in the cooling or heating mode. Remember
that the time periods specified in this menu are used during
the winter season (heating mode) and for the summer (cooling
mode), therefore on the basis of the mode active on the unit,
appropriate settings will be performed. The possible settings
both for cooling and heating are:
• SET1 = unit on and functioning with set point 1 (the coher-
ent set point will be selected on the basis of the season acti-
vated);
• OFF = the unit is switched off;
Display/Parameter
Display/Parameter
11