AERMEC NXW Série Manuel D'utilisation page 40

Visualisation on unit display
A
Clock
B
Period scheduler
Start Stop
--/-- --/--
--/-- --/--
--/-- --/--
C D
Parameters that can be modified
by the user
Visualisation on unit display
A
Clock
B
Spec.days
SD1: 25/04
SD2: 01/05
SD3: 06/03
SD4: --/--
SD5: --/--
SD6: --/--
C
Parameters that can be modified
by the user
12
CLOCK/PERIOD menu - Setting SPECIAL PERIODS
Index
Cool Heat
--- ---
--- ---
--- ---
E F
E / F
CLOCK/PERIOD menu - Setting SPECIAL DAYS
Index
Cool Heat
--- OFF
SET1 ---
OFF ---
--- --- D/E
--- ---
--- ---
D E
Display/Parameter
A Clock: Indicates the date and time of the system
B Special periods: indicates a maximum series of three periods
(periods mean at least two days) in which a particular behav-
iour can be programmed.
WARNING: the settings introduced as special periods have
priority with respect to normal time periods.
C Start: Indicates the date of the start of the special period
selected (remember that the special period can only be speci-
fied within the year in progress, for this reason the date is
expressed as a day and month).
D End: indicates the date of the end of the special period select-
ed (remember that the special period can only be speci-
fied within the year in progress, for this reason the date is
expressed as a day and month).
Cooling/Heating: indicates the setting used during the spe-
cific time period in the cooling or heating mode. Remember
that the time periods specified in this menu are used during
the winter season (heating mode) and for the summer (cooling
mode), therefore on the basis of the mode active on the unit,
appropriate settings will be performed. The possible settings
both for cooling and heating are:
• SET1 = unit on and functioning with set point 1 (the coher-
ent set point will be selected on the basis of the season acti-
vated);
• OFF = the unit is switched off;
Display/Parameter
A Clock: Indicates the date and time of the system
B Special days: indicates a series of days when particular behav-
iour can be programmed.
WARNING: the settings introduced as special days have
priority with respect to normal time periods and special
periods.
C Start: Indicates the special day selected (remember that the
special day can only be specified within the year in progress,
for this reason the date is expressed as a day and month).
Cooling/Heating: indicates the setting used during the spe-
cific time period in the cooling or heating mode. Remember
that the time periods specified in this menu are used during
the winter season (heating mode) and for the summer (cooling
mode), therefore on the basis of the mode active on the unit,
appropriate settings will be performed. The possible settings
both for cooling and heating are:
• SET1 = unit on and functioning with set point 1 (the coher-
ent set point will be selected on the basis of the season acti-
vated);
• OFF = the unit is switched off;