Replacing The Battery - Airia Lifebreath RNC5-ES Guide Du Propriétaire

Timers (continued)
Lifebreath Wireless 20/40/60 Minute Timer
99-DET02
Initiates high speed ventilation for 20, 40 or 60 minutes.
The 20/40/60 minute status lights indicate high speed
operation.
Wireless Timers have an estimated range of 40' with no
obstructions. To increase the range of a Wireless Timer
a 99-RX02 Repeater may be used.
Using the Wireless 99-DET02 Timer
When paired to the main wall control, the Wireless Timer
may be moved to a remote location in the home such as
a bathroom.
Pressing the Select Button on the Timer will initiate high
speed fan operation. The corresponding Status Light will
illuminate under the number on the Timer to indicate
either 20, 40 or 60 minutes of high speed fan operation.
To cancel the call for high speed fan operation, press the
Select Button until the Status Lights are no longer
illuminated.

Replacing the Battery

When the battery on the timer needs to be replaced in
the Wireless Timer, the red LED Battery Indicator will
illuminate.
To replace the battery, first remove the Face Plate by
pulling it off the wall. On the back of the Timer Face
Plate the battery will be exposed. Replace the battery
and re-attach the Face Pate to the Back Plate. Be
careful not to damage the tabs on the Back Plate when
re-attaching the Face Plate.
Select Button initiates
high speed ventilation
for 20, 40 or 60 min.
Back of
99-DET02 99-
Face Plate
Battery
Removable
Backplate
20/40/60 Minute
Status Lights
Battery Indicator
Back Plate
Face Plate
10