Selecting The Ventilation Rate - Airia LIFEBREATH ERV Serie Guide D'installation

Selecting the Ventilation Rate

The modes of operation and speeds are used to adjust your indoor ventilation rate. Experiment with
the ventilation levels in your home to evaluate the ideal amount of ventilation to suit your home and
personal preferences.
I. Continuous Ventilation (Recommended)
This mode of operation provides continuous ventilation within the home. You may, for example,
select Continuous Ventilation at low speed for normal operation and increase to high speed during
increased activity levels, such as cooking and showering, etc.
II. 20 Minutes On, 40 Minutes Standby (Requires DX Control)
This mode of operation provides 20 minutes of ventilation each hour. You can use this ventilation
mode at low speed for low household activity levels or when the home is unoccupied.
III. 20 Minutes On, 40 Minutes Recirculation (Not Available on all models)
Ventilates for 20 minutes and recirculates the household air for 40 minutes each hour.
IV. Continuous Recirculation (Not Available on all models)
Continuously recirculate your household air with ventialtion mode available through additional
controls. For independently ducted ERV's only.
Note
Due to ongoing research and product development, specifications, ratings, and dimensions are subject to change

without notice.
Warning
Disconnect the power from the unit before cleaning or servicing.


To prevent electrical shock, it is extremely important to confirm the polarity of the power line that is switched by
the safety (disconnect) switch. The hot line (black) is the proper line for switching. Use either a voltmeter or test
lamp to confirm the absence of a voltage between the disconnect switch and ground (on the cabinet) while the
door is open. This procedure must be followed, as dwellings are occasionally wired improperly. Always ensure the
proper grounding of the unit.
13