Table des Matières
Publicité
The Lifebreath Digital Control 99-DXPL02
The Lifebreath Digital Control offers the most advanced features to control your home's ventilation.
Key Features :
5 speed fan setting
Standby setting (fan speed 0)
Electronic Dehumidistat
20/40/60 HIGH speed override button
Compatible with 99-DET02 Wireless Timers
Easy to read backlit LCD screen
Slim-line design
Connect to 3 wire 20 gauge low voltage wire
Five selectable modes of operation
Continuous Ventilation
•
20 min. Ventilation / 40 min.
•
Recirculation
20 min. Ventilation / 40 min. OFF
•
10 min. Ventilation / 50 min. OFF
•
Continuous Recirculation
•
Service indicator
Digital Control Operating Instructions (DXPL02):
Turning on the Control
Press and release the ON/OFF button
Setting the Ventilation Speed
Press and release the Fan button
displayed on the screen beside the Fan symbol
0. The fan will turn ON if required by a remote Timer (if installed).
20/40/60 High Speed Button
Press and release the 20/40/60 High Speed button
40 or 60 minutes. Press once for 20 minutes, twice for 40 minutes, 3 times for 60 minutes and 4
times to disable. The
flash to indicate the time interval selected. When the timer runs out, the unit will return to it's
previous operating speed.
Setting the Mode of Operation
There are 5 modes of operation available with the DXPL02 control. Pressing the Mode button
will cycle through the different modes of operation and they will be displayed on the screen.
Attention
Only one main control can be installed on your system.
Recirculation is not available on all models.
Timers will not function when mode of operation is set to "OFF", unless specifically installed for that function. (See
Installation Guide for other options.)
20/hr
40/hr
. The light above will illuminate.
to select one of the 5 fan speeds. The fan speed will be
will appear on the screen and the corresponding section of the clock will
ON/OFF
Button
Fan Speed
Button
20/40/60 High
Speed Button
20/hr
40/hr
10/hr
50/hr
. Standby mode (Fan OFF) is indicated as speed
to temporarily initiate HIGH Fan speed for 20,
Instruction Card
Mode
Button Dehumidistat
Button
RESET Button
8
Publicité
Table des Matières
