Call Tone; Dual Watch Mode - Albrecht Tectalk Duro XS Mode D'emploi

1.1. Call Tone

call alert tones and off.
To change the Call Alert melody, press the MODE button until the
Call icon displays.
Use the UP or DOWN button to change the setting. Press the
PTT or FUNCTION button or wait for 5 seconds to store your
choice.

1.1. Dual Watch Mode

seconds before resuming the dual watch. To activate the dual
watch mode. fi rst select a radio channel as the primary channel.
To select the dual watch channel press the MODE button until
the Dual Watch icon and current setting appear Use the UP or
DOWN button to select the desired dual watch channel. Press
the PTT or MODE button or wait for 5 seconds to store your
choice and activate the dual watch.
The radio display will alternate between the primary and dual
watch channels and the dual watch icon will appear.
To deactivate the dual watch press the SCAN button after the
FUNCTION button press.
If you press the PTT button whilst receiving a signal in Dual
Watch mode the radio will transmit on the currently displayed
channel. If you press the PTT button when no signal is present
the radio will transmit on the primary channel.
40
To alert other users to your message and
gain their attention you can send a Call Alert
melody by pressing the PTT button twice in
quick succession. There are fi ve different
Dual Watch mode allows you to monitor two
channels; a primary channel and the dual
watch channel. When a signal is received
on either channel the unit willpause for 5
English