Xylem Si Analytics TitroLine 5000 Mode D'emploi page 105

These stages can also be changed during manual titration (Fig. 43).
Fig. 43
Stage 5 corresponds to maximum titration speed. Speed is reduced by 50% each time.
Example:
20 ml dosing unit
Stage 5 100 %
Stage 4 50 %
Stage 3 25 %
Stage 2 12.5 %
Stage 1 6.8 %
Even if the titration is completed, press <STOP> or approx. for 1 sec. the grey key of the manual controller.
The titration result will be calculated and displayed (Fig. 44).
Fig. 44
The result can also be printed or stored in PDF- and CSV-format.
<ESC> will take you back to the start menu way to start the next titration immediately.
Filling of the interchangeable unit occurs automatically.
(ca. 40 ml/min)
(ca. 20 ml/min)
(ca. 10 ml/min)
(ca. 5 ml/min)
(ca. 2.5 ml/min)
105