dji AGRAS T20 Guide De Démarrage Rapide page 6

Using the T20
1. Preparing the Intelligent Flight Battery
Only use official DJI flight batteries (model: AB3-18000mAh-51.8V).
Check the battery level before flying, and charge it according to the
corresponding document.
2. Preparing the Aircraft
M2
Unfold the M2 and M6 arms, and tighten
the two arm sleeves.
Unfold the propeller blades.
Make sure that the battery is firmly inserted into the aircraft. Only insert or remove the battery when the aircraft is
●
powered off.
To remove the battery, press and hold the clamp, and then lift the battery up.
●
When folding the arms, make sure to fold the M3 and M5 arms first, and then the M2 and M6 arms. Otherwise, the
●
arms may be damaged. Lift and lower the M1 and M4 arms gently to reduce wear and tear.
M6
Unfold the M3 and M5 arms followed by M1 and
M4, and then tighten the four arm sleeves.
Insert the Intelligent Flight Battery into the aircraft
until you hear a click.
M1
M3
M4
M5
5