Tank Cleaning; Filter Cleaning - ELSEA TITANUS BL375T Manuel D'instructions

6 . 1 M a c h i n e c l e a n i n g
The cleaning of the machine is very important to maintain the full efficiency of the same.
EN
For cleaning the machine can be used dry cloths and compressed air for less accessible areas.
6.1.1

Tank cleaning

The cleaning of the recovery tank is critical to avoid fouling and solids accumulations within it.
Proceed as follows:
1. turn off the machine;
2. turn the hooks and remove the warhead;
6.1.2

Filter cleaning

The filter is made of polyester and belongs to the "L" class.Change the
filter regularly and at least 1 once a year. Use only
original spare parts from the manufacturer.
6.1.3 Air filter for engine cooling cleaning
Aspirate (using the machine's vacuum tube) dirt that
accumulates on the side filter positioned on the machine
head, keep clean the filter preserves the functioning of
the engine.
7 T R O U B L E S H O O T I N G
The unit does not
Operation stopped
The suction power
The suction power
decreases abruptly
TITANUS BL375T
Instruction Manual
3. grasp the tank by the handle and turn it;
4. remove dirt and dispose of in an appropriate
manner;
5. wash the tank if necessary.
DEFECTS
start
decreases
The tank is filled; the suction
Suction block
CAUSE
Lack power
The tank is filled
suction pipe clogged or
accessories
tubes are clogged
It intervenes short-circuit
protection; the thermal
protection
25
REMEDY
Check the emergency
switch position
Check and empty the
recovery tank
Check and clean the suction
pipe
Check and empty the tank;
check and clean the suction
tubes
Try to turn off and turn on
the machine. If the error
persists contact Support
REV 00