Control Station - ELSEA TITANUS BL375T Manuel D'instructions

4 . 3 C O M M I S S I O N I N G
EN
4.3.1

Control station

The machine is equipped with a control station from which an operator has the ability to manage all
the machine functions.
All controls are located on the front panel and are designed to be ergonomically operated and easily
understood by the operator.
1. SWITCH MOTOR 1
2. SWITCH MOTOR 2
3. SWITCH MOTOR 3
4. VACUUM GAUGE
4 . 4 U S E
1. Make all the adjustments described in the previous paragraphs;
2. verify the proper electrical connection;
powerful suction if desired, by switching on the 0/1 switch;
6. work with the machine;
7. check the indication of the vacuum gauge, if the indicator shows a value close to 200 mbar,
clean the filter;
TITANUS BL375T
Instruction Manual
3. switch on the vacuum by switching on the 0/1 switch;
4. turn on the second motor for a more
5. turn on the third motor for the maximum vacuum power by
switching on the 0/1 switch;
8. stop the machine by bringing to 0 all the switches;
23 REV 00