Accessories - ELSEA TITANUS BL375T Manuel D'instructions

4 . 2 P R E L I M I N A R Y O P E R A T I O N S
The following instructions will explain the steps you should take before using the machine.
EN
4.2.1 Filter mounting
To mount the polyester filter class "L" insert the filter on motor base as shown in figure;
position the filter tightener, rotate counterclockwise to lock it
and fasten the three screws.
To remove the filter follow the previous step in the opposite
way.
4.2.3

Accessories

The manufacturer offers an optional accessory kit, such as:
CARTRIDGE FILTER φ250
H178
FI250178HL
METAL CYCLONE
φ300
CMCI300N
TITANUS BL375T
Instruction Manual
fasten the wing nut;
4.2.2 Cover mounting
After mounting the filter place the cover as shown, and close
the 2 hooks, carefully install the suction hoses before
turning on the machine.
21
SPONGE FILTER FOR
LIQUIDS
ACCA165A
COMPLETE FLEXIBLE
HOSE m2,5
φ50
ACTF50C
REV 00