Important Safety Instructions - Dali SUB K-14 F Manuel

Important Safety InStructIonS

• Read these instructions– All the safety and operating instructions
should be read before this product is operated.
• Keep these instructions– The safety and operating instructions
should be retained for future reference.
• Heed all warnings– All warnings on the appliance and in the
operating instructions should be adhered to.
• Follow all instructions– All operating and use instructions should
be followed.
• Do not use this apparatus near water– The appliance should not
be used near water or moisture – for example, in a wet base-
ment or near a swimming pool.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched parti-
cularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
• Please keep the unit in a well-ventilated environment.
6
WarnInG: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The appatatus should
not be exposed to dripping or splashing. Objects filled with liquids,
such as vases should not be placed on the apparatus.
WarnInG: The mains plug or appliance coupler is used as discon-
nect device, the disconnect device shall remain readily
operable.
•This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of non-insulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
• Warning: To reduce the risk of electric shock, do not remove
cover (or back) as there are no user-serviceable parts inside.
Refer servicing to qualified personnel.
• The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and mainte-
nance instructions in the literature accompanying the appliance.
This equipment is a Class II or double insulated electrical
appliance. It has been designed in such a way that it does not
require a safety connection to electrical earth.
This product contains electrical or electronic materials. The
presence of these materials may, if not disposed of properly, have
potential adverse effects on the environment and
human health.
Presence of this label on the product means it should not be
disposed of as unsorted waste and must be collected separately.
As a consumer, you are responsible for ensuring that this product
is disposed of properly.
Voltage selector: Used to adjust the input rating(100-120Vac/60Hz
and 220-240 Vac/50Hz),please just insert the mains power
plug into the socket-outlet with voltage within the setting of the
selector. The current ratings of mains fuse links are different for
different input rating(see marking for details), and the fitted mains
fuse link was just related to the input rating as setting of the
selector during factory assembly line work, please ask a qualified
personnel to help you replace the mains fuse link before you adjust
the voltage selector.