Panasonic WX-CC411 Manuel D'utilisation page 35

V/Det Override
"V/Det Override" is a function that sets the vehicle detectors
virtually to ON and keeps both the order post microphone
and speaker in the ON setting.
Touch (Quick Operation button) on the
touch panel, and then touch the [Lane] button.
Touch the [ON] button for [V/Det Override] to
enable this function.
To release V/Det Override, touch the [OFF] button.
OFF:
When the vehicle detector detects a vehicle at the order
post, a beep tone is heard from the earphone.
When the Talk button on an All-In-One Headset or Belt Pack
is pressed, the order post's speaker and microphone are
turned on.
When the vehicle drives off, vehicle detection is turned off.
The OFF setting and Auto-Talk-Lock mode can now be
established.
ON:
When [V/Det Override] is set to ON, the order post's
microphone is turned on permanently and talking is enabled
even when the vehicle detector is not ON. (Sound from the
order post's microphone can be forcibly heard.)
Note
When Speed Team is enabled, the setting for V/Det
Override is automatically turned OFF.
In Speed Team mode, you cannot change the setting
for V/Det Override.
Talk/page release
The talk (or page) status of an All-In-One Headset or Belt
Pack is forcibly released.
Touch (Quick Operation button) on the
touch panel, and then touch the [Lane] button.
Touch the [Execute] button for [T/P Release].
Communication is forcibly terminated.
Note
The talk (or page) status of the All-In-One Headset or
Belt Pack in manager mode is not released.
35