Panasonic WX-CC411 Manuel D'utilisation page 34

Operating procedures
To release Speed Team operation, touch the
[OFF] button for [Speed Team] on the screen in
step 2.
In the All-In-One Headsets or Belt Packs, the
"SPEED TEAM OFF" voice prompt is heard from the
earphones, and normal operation is restored.
Note
In Speed Team mode, it is not possible to talk with
customers at the order posts.
When talking is attempted from an All-In-One Headset
or Belt Pack, the "Operation not allowed" voice prompt
is heard from the earphone.
34
Cross Beep (WX-CC412 only)
"Cross Beep" is a function that enables a beep tone to be
heard from the All-In-One Headsets or Belt Packs when a
customer approaches the order post of the other lane.
Touch (Quick Operation button) on the
touch panel, and then touch the [Common]
button.
Touch the [ON] button for [Cross Beep] to
enable Cross Beep operation.
To release Cross Beep, touch the [OFF] button.
OFF:
If lane A has been selected, beep tone A will be heard when
a vehicle in lane A is detected.
However, beep tone B will not be heard even when a vehicle
in lane B has been detected.
ON:
If lane A has been selected, beep tone A will be heard when
a vehicle in lane A is detected.
Furthermore, beep tone B is heard at a low volume level
even when a vehicle in lane B has been detected.
When vehicles have been detected in both lanes, beep tone
A and beep tone B, which are heard at a low volume level,
will be heard alternately.
Vehicle detector
Cross
Lane A is Lane B is
Beep
ON ON
–
OFF –
–
–
ON
All-In-One Headset or Belt Pack
A B
Beep A –
–
Beep B
Beep A Beep B
Beep A Low level Beep A
Low level Beep B Beep B
Beep A + Beep B +
Low level Beep B Low level Beep A