Troubleshooting; Safety Tips; Faults - Causes And Remedies - Beem B5.001 Mode D'emploi

Troubleshooting

safety tips

dAnger
electric shock hazard!
Pull the plug out of the mains socket before starting
►
troubleshooting.
WArning
Danger caused by unqualified repairs!
Unqualified repairs can pose considerable dangers for the user
and serious damage to the appliance.
Repairs to electrical appliances may only be carried out by
►
the works after-sales service or by specialists trained by the
manufacturer.

faults - causes and remedies

Fault
Lifting mechanism
not lock into its lower
position.
The "Heating" indicator
lamp does not light up
after switching on the
mini pan.
The automatic circuit
breaker in the fuse box
trips.
NOTE
If you cannot resolve the problem with the steps described
►
above, please contact after-sales service.
BEEM - Elements of Lifestyle
Possible cause
does
Not plugged in.
No mains power.
Too many appliances con-
nected to the same power
circuit.
Appliance is defective.
Troubleshooting
Remedy
Insert the plug.
Check the fuse /
socket.
Reduce the number
of appliances on the
power circuit.
Contact After-sales
Service.
en
63