Removing The Accessories - KitchenAid KHM31 Mode D'emploi

SETTING UP THE HAND MIXER
C
Paired accessories (beaters, optional
dough hooks) include one accessory with
a collar (D), and one without (C). Single
accessories come with a collar (D) (liquid
blending rod) or without (C) (whisk).
A
Insert the accessory without a collar
(C) into the smaller opening (A).
3
Align and push to lock into place.

REMOVING THE ACCESSORIES

If the Hand Mixer is running, stop
the Hand Mixer by sliding the
Power switch to the "O" (Off)
1
position. Then unplug from the
electrical outlet.
W10586270C_V2.indd 9
D
Insert the accessory shaft with the
collar (D) into the larger opening (B)
of the hand mixer. Align the flanges
2
on the shaft with the slots in the
opening. Push to lock into place.
NOTE: An accessory shaft without a collar
may be used in either opening (A or B).
Those with a collar may only be used in the
larger opening (B).
B
Press the ejector button to release
the accessories from the Hand
Mixer, then remove them.
2
B
D
SETTING UP THE HAND MIXER | 9
4/27/2018 2:13:14 PM