Daily Cleaning - Beko CEP5152B Mode D'emploi

6
Cleaning and Maintaining Your Machine

6.1 Daily Cleaning

1. Always make sure the Control
Knob (5) is in the ""O"" position
and the machine is powered off
by pressing the Power Button
(11) on the side of the machine
so that the blue light is turned
off. Unplug the cord from the
outlet and allow all of the parts
to cool before cleaning.
2. Remove and wash the frothing
sleeve (12) and wipe the
frothing wand (10) with a damp
cloth.
3. The water tank (3), sieves and
drip tray (9) can be washed in a
solution of hot water and mild
liquid soap.
CAUTION: Do not
A
immerse
in water, in any other
liquid or place in the
dishwasher.
Never use abrasive
C
cleansers, steel wool
pads or other abra-
sive
clean the machine.
Manual Espresso Machine
appliance
materials to
/ User Manual
6.2 Cleaning the
Frothing Wand
It is recommended to purge (chap-
ter 6, point 3) and wipe the frothing
wand (10) clean with a damp cloth
each and every time immediately
after frothing or steaming milk to
prevent build up. Thoroughly clean
the frothing wand before turning
off the machine to ensure cleanli-
ness.
1. Pull the black frothing sleeve
(12) down and off the froth-
ing wand (10) and clean under
warm running water.
2. Fill a cup with a bit of water
and immerse the frothing wand
(10).
3. Turn the Control Knob (5) to the
right towards the "Steam icon"
and let steam push into the
water for a few seconds.
4. Turn the Control Knob (5) back
towards the center to the OFF
position "O".
5. Use a cloth to dry the frothing
wand (10) and replace the black
frothing sleeve (12), ensuring
it is firmly pushed up onto the
frothing wand.
27 / EN