THOMSON RCD203U Mode D'emploi page 29

Programmed playback
The program function allows you to program the order in which
a disk's tracks are played, up to 99 tracks.
Note: Programming can only be done in STOP mode.
Press the PROGRAM button (12) "PROGRAM" blinks on the
o
LCD screen.
Use the NEXT (7) or BACK (9) buttons to select the first track
o
of the program.
Press the PROGRAM button (12) again to confirm the
o
selection and store the track. The program number is
increased on the screen (e.g.
Repeat these 2 steps to program other tracks.
o
Press the PLAY/PAUSE/USB button (5) to start playing the
o
tracks. Tracks are played in the programmed order.
The program indicator is displayed without blinking when the
o
program function is used.
Press the STOP button (4) once to stop playing the program
o
without deleting it. The program indicator is still displayed.
To cancel the program function, press the STOP button (4)
o
twice: the program indicator is switched off.
RCD203U / RCD204U / RCD205U
).
PORTABLE CD RADIO
Playback stops automatically after the last track has been played.
The program remains in memory until the mode is changed, the
disk is removed or the appliance is switched off.
Programming of the tracks can be combined with the repeat
function. Begin by programming the order, then start playing
the CD. Then use the Repeat function (see the "Repeat mode"
section).
Random playback
You can play the current selection's audio files
in a random order:
During playback, press the REPEAT/RANDOM button (13) to
o
activate or de-activate the random playback function.
When you activate this function, the current selection's audio
o
files are played in a random order.
USING THE CD PLAYER
25 EN