Philips InfraCare HP3621 Mode D'emploi page 11

Never use abrasive liquids such as scouring agents, petrol or acetone
to clean the appliance.
1 Clean the lamp housing and the base with a moist cloth. Do not
let any water run into the appliance.
2 You can clean the outside of the filter with a soft cloth sprinkled
with some methylated spirits.
Storage
1 Unplug the appliance and let it cool down for about 15 minutes
before storing it.
Do not allow the cord to come into contact with the filter when
it is hot.
Always lift or carry the appliance by its handgrip (fig. 12).
Store the InfraCare in a dry place.
B
Replacement
Filter
The infrared filter protects against exposure to undesired light. It is
therefore important to have a damaged or broken filter replaced right
away.
Lamp
The effectiveness of the lamp does not diminish in the course of time.
Have the lamp replaced when it stops functioning.
Have the 200W Philips infrared halogen lamp replaced by a service
centre authorised by Philips.They have the knowledge and skills
required for this job and the original spare parts for your appliance.
The lamp has been developed to last at least 250 operating hours.
B
ENGLISH
11