Osd - NEC MultiSync SC40 Mode D'emploi

OSD Controls
DatE & tiME
SCHEDuLE rESEt
PiP
KEEP PiP MoDE
PiP MoDE
PiP SiZE
PiP PoSition
PiP rESEt
LanguagE

oSD

oSD turn oFF
oSD PoSition
inForMation oSD
Monitor inForMation
- continued
Sets the date, time, and daylight saving region. Date & time must be set in order for the
"SCHEDuLE" function to operate.
YEar
MontH
DaY
tiME
DaYLigHt SaVing
resets the following settings within the SCHEDuLE menu back to factory setting:
oFF tiMEr, SCHEDuLE SEttingS.
allows the monitor to remain in "PiP" mode after powering off. When Power is returned,
PiP appears without having to enter the oSD.
Picture-in-Picture
oFF
PiP
PoP
SiDE BY SiDE (aSPECt)
SiDE BY SiDE (FuLL)
Selects the size of the sub-picture used in Picture-in-Picture (PiP) mode.
SMaLL
MiDDLE
LargE
Determines where the PiP appears on the screen.
resets the following settings within the PiP menu back to factory setting:
KEEP PiP MoDE, PiP MoDE, PiP SiZE, PiP PoSition.
Select the language used by the oSD.
EngLiSH
DEutSCH
FranÇaiS
itaLiano
ESPaÑoL
SVEnSKa
turns off the oSD after a period of inactivity. the preset choices are 10-240 seconds.
Determines the location where the oSD appears on the screen.
uP
DoWn
LEFt
rigHt
Selects whether the information oSD is displayed or not. the information oSD will be
displayed when the input signal or source changes. the information oSD will also give
a warning when there is no-signal or the signal is out-of range.
an interval between 3 to 10 seconds for the information oSD to appear is avaiable.
Monitor information.
English-28