Unpacking; Assembling - VWR VisiScope STB250 Manuel D'utilisation

Table des Matières

Les langues disponibles

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container

and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)

fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope

from the container and put it on a stable desk.

Once you open the box, these are the microscope's components:

①

Insert the stereo head into the holder on

the stand, and tighten the side screw.

(Fig.1)

Insert the eyepieces into the tubes of the

head. (Fig.2)

③

②

④

① Stereo Head

② Microscope stand

③ Eyepieces

④ Black/white

contrast disc

⑤ Power cable

⑤

Fig.1

Fig.2

Table des Matières

Table des Matières

Visiscope szb250 Visiscope szt250 630-1576 630-1577 630-2725