Safety Information; Package Contents; Unpacking - VWR VisiScope 200 Serie Manuel

Masquer les pouces Voir aussi pour VisiScope 200 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Warning
This microscope is a scientific precision instrument designed to last for many years with a minimum of main-
tenance. It is built to high optical and mechanical standards and to withstand daily use.
We remind you that this manual contains important information on safety and maintenance, and that it must
therefore be made accessible to the instrument users.
We decline any responsibility deriving from incorrect instrument use that does not comply with this manual.

Safety Information

Avoiding Electrical Shock
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in off position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label.
However, users have full responsibility to use this equipment safely.
Please follow the guidelines below, and read this manual in its entirety to ensure safe operation of the unit.

Package Contents

DESCRIPTION
Microscope stand with 4 position nosepiece, stage, condenser
Optical head (ML224: monocular; BL224: binocular; TL224: trinocular)
Objective 4x
Objective 10x
Objective 40x
Objective 100x
(or Objective 60x for ML214 and BL214)
Eyepiece WF10x/18mm
Objective vials
Green filter, 30mm diameter
Immersion oil (not in ML214 and BL214)
Dust cover
Power supply output 6V

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the contain-
er and lift the top half of the container. Take care to ensure that the optical items (objectives and eyepieces)
do not fall out and get damaged. Using both hands (one around the neck and one around the base), lift the
microscope from the container and put it on a stable desk.
Place the observation head onto the top of the neck and tighten the lock-screw. Insert the eyepieces into the
eye tubes.
Connect the provided power supply to the power supply input jack on the rear of the microscope.
3
QUANTITY
1
1
1
1
1
1
1 (ML224)
2 (BL224)
4
1
1
1
1

Publicité

Chapitres

Table des Matières
loading

Table des Matières