Pioneer XW-BTS3-K Mode D'emploi page 17

Bluetooth Audio playback
1. Press [Bluetooth] button on the remote control. (Mode indicator :
green)
2. Make sure the dock is empty.
3. Press and hold [PAIRING] button until you hear 2 consecutive
"beep" sounds. Then, the blue indicator on the top panel blinks
quickly and the unit will enter the pairing mode.
4. Switch on the Bluetooth wireless technology device that you want
to perform pairing with, place the device within 1 m (3.2 ft.) of the
system, and set it to the pairing mode.
Pairing begins.
• In case of entering PIN code, use "0000".
( Only "0000" works for PIN code in this product. )
5. When Bluetooth wireless technology device is connected, the blue
indicator on the top panel will change from blinking to lit.
6. Start playback of music contents stored in Bluetooth wireless
technology device.
Connect the Latest Paired Bluetooth wireless technology Device
When the unit is switch on again to Bluetooth mode next time, it will be connected
automatically with equipment that has the latest connected device already.
Connect previous Paired Bluetooth Device
1. If you want to connect other paired device instead of the latest
paired one, please make sure the Bluetooth connection of the latest
device dis-connect. Then, the blue indicator on the top panel blinks
slowly and the unit will change the waiting for connection mode.
*Alternatively, there is also a way to switch the unit in pairing mode.
2. Switch on other paired device, and select this unit from this device
Bluetooth list.
3. Connection with other devices is successful, the blue indicator will
change from blinking to lit.
• Operating range of Bluetooth audio is up to 10 m (32 ft.). (Measured in open space. Walls
and structures may affect range of device.)
17