Test Results - WaterLink SpinTouch 3580 Traduction Des Instructions Originales

Find Quality Products Online at:
SAVE, PRINT, AND SEND TEST RESULTS
Test results can be saved, transferred to the WaterLink Connect 2 mobile app via Bluetooth,
and sent to the Mobile Bluetooth Printer (Code 5-0066).
Tagging
Test History Settings
The WaterLink Spin Touch can log test results for 250 water samples in the Test History.
The results for the most recent sample will be located at the top of the list. All results can
be logged automatically or results for an individual sample can be logged after the sample
has been tested.
To turn on automatic logging, tap
Tap and to return to the test screen. When Auto Save is selected
highlighted on the Test Results screen.
To manually log results for one sample at a time, Auto-Save Tests must be disabled. If
Auto-Save Tests is disabled will be highlighted on the Test Results screen. After the test
has been run, tap to save the results for that water sample to the Test History.
A user defined identification tag can be assigned to an individual sample result. To enable
tagging, tap on the Test Screen. Tap
to the test screen. The tag can be up to 4 hexadecimal characters. It cannot begin with
a zero. To tag a test result, tap
buttons to enter up to four characters. Tap
and return to the Test Results screen. Tap
saving the tag. The tagged result will appear on the Test Results screen and the Test
History screen. The tag will be preceded by "T-".
Test History
12:02A 16-Apr Salt 401
12:01A 16-Apr Salt 301
12:00A 16-Apr T-4650 Chlorine 100
12:00A 16-Apr Chlorine 300
11:57A 16-Apr T-ABC7 Chlorine 300
11:49A 16-Apr Biguanide 400
Select All/ View
De-Select All Selected
Results
GlobalTestSupply
www.

Test Results

Test Time 05:30:06 16-Apr-2020
FCL - 1.31 CYA - 2
TCL - 1.31 COPPER - 0.1
CCL - 0.00 IRON - 0.1
PH - 7.8 PHOS - 0
ALK - 100 SALT - 489
HARD - 230
Save Print Transfer Return
Results Results Results to Test
via via Screen
Bluetooth Bluetooth
on the Test Screen. Tap . Select Auto-Save Tests.
. Select Enable tags. Tap
on the bottom of the Test Results screen and use the
to erase a character. Tap
to return to the Test Results screen without
Go to Top
Scroll up
or down
the test
list by 5
entries
Go to Bottom
Delete History Home
Selected Settings
Results Select
Auto Save
9
will not be
and to return
to save the tag
.com
sales@GlobalTestSupply.com