Maintenance And Rebuild Practices; Fire Safety Standard; Safety Instructions - Windsor Saber Compact 16 SP Mode D'emploi

MAINTENANCE AND REBUILD
PRACTICES
Operation of the unit may be hazardous if
maintenance is neglected or repairs, re-
builds, or adjustments are not performed in
accordance with the manufacturer's design
criteria. Therefore, maintenance facilities
(on or off premises), trained personnel, and
detailed procedures shall be provided.
Maintenance and inspection of the unit shall
be performed in conformance with the fol-
lowing practices:
A a schedules planned maintenance, lubri-
cation, and inspection system shall be
followed; consult the manufacturer's rec-
ommendations.
B only tranined and authorized personnel
shall be permitted to maintain, repair, ad-
just, and inspect the unit, and in accor-
dance with manufacturer's
specifications.
Avoid fire hazards and have fire protection
equipment present in the work area. Do not
use open pans of fuel or flammable cleaning
fluids for cleaning parts.

FIRE SAFETY STANDARD

Any unit not in safe operating condition shall
be removed from service.
Fire Prevention: The unit shall be kept in a
clean condition and reasonably free of lint,
excess oil, and grease. Noncombustible
agents are preferred for cleaning the unit.
Flammable liquids [those having flash points
at or above 100°F (37,8°C)] are not allowed.
Precautions regarding toxicity, ventilation,
and fire hazard shall be appropriate for the
agent or solvent used.
Nameplate Visibility: The unit type designa-
tions as shown on the nameplate and the
type markers shall not be covered over with
paint so that their identification information is
obscured.
Please read and comply with
these instructions prior to the
initial operation of your appliance. Retain
these operating instructions for future refer-
ence or for subsequent possessors.

Safety Instructions

Safety Devices
Safety devices serve to protect the user and
must not be rendered inoperational or their
functions bypassed.
Control handle
To render brush drive immediately inopera-
tional, release the control handle.
Symbols
The following symbols are used in this oper-
ating manual:
Danger
Indicates an immediate threat of danger.
Failure to observe the instruction may result
in death or serious injuries.
Warning
Indicates a possibly dangerous situation.
Failure to observe the instruction may result
in light injuries or damage to property.
Note
Indicates useful tips and important informa-
tion about the product.
Function
The appliance is used for wet cleaning or
polishing level floors. It can be easily adjust-
ed to the cleaning task by setting a cleaning
program and the water quantity.
A working width of 400mm / 15.7 in and a ca-
pacity of 25l / 6.6 gal each of the fresh and
dirty water reservoirs enable effective clean-
ing.
Note
The appliance can be equipped with various
accessories depending on the cleaning task.
Please request our catalogue or visit us on
the Internet at www.kaercher.com.
5
English