Yamaha WR426F 2001 Manuel D'atelier page 568

FRONT WHEEL AND REAR WHEEL
1
9. Install:
Brake hose 1
G
To brake hose holder 2.
NOTE:
Before tightening the bolt (brake hose holder),
pass the brake hose in front of the axle boss
a, then fit it into the hose groove b so that the
brake hose does not contact the nut (wheel
axle).
10. Install:
Hose cover 1
G
Plain washer 2
G
Bolt [hose cover (M8)] 3
G
Bolt [hose cover (M6)] 4
G
11. Install:
Trip meter cable 1
G
5 - 7
CHAS
10 Nm (1.0 m · kg, 7.2 ft · lb)
16 Nm (1.6 m · kg, 11 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)