Yamaha WR426F 2001 Manuel D'atelier page 316

FRONT FORK COMPRESSION DAMPING FORCE
ADJUSTMENT
STANDARD POSITION:
G
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
10clicks out
*8 clicks out
* For EUROPE
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
EC36J001
FRONT FORK COMPRESSION DAMPING
FORCE ADJUSTMENT
1. Remove:
Rubber cap
G
2. Adjust:
Compression damping force
G
By turning the adjuster 1.
Stiffer a → Increase the compression
damping force. (Turn the adjuster 1
in.)
Softer b → Decrease the compression
damping force. (Turn the adjuster 1
out.)
Extent of adjustment:
Maximum
Fully turned in
position
3 - 38
INSP
ADJ
Minimum
20 clicks out (from
maximum posi-
tion)