Napoleon Acies Série Manuel D'installation page 27

Before framing your appliance, determine vent requirements before deciding the final location of the appliance.
After rough framing, place the appliance in its final position.
single-sided
J
minimum framing
Ref
E
F
J
*L
see-thru
minimum framing
Ref
E 16 3/16" (41.1cm)
53 13/16" (136.7cm)
F
J Optional - Appliance does not need to be elevated above floor
74" (188cm)
*L
rough framing - before appliance installation
L
E F
L38
18" (45.7cm)
53 13/16" (136.7cm)
Optional - Appliance does not need to be elevated above floor
74" (188cm)
L
E
F
J
L38
Before framing the appliance, ensure to install the
firestop first as it will not fit between the studs if
installed after framing.
L50
18" (45.7cm)
65 13/16" (167.2cm)
74" (188cm)
Before framing the appliance, ensure to install the
firestop first as it will not fit between the studs if
installed after framing.
L50
16 3/16" (41.1cm)
65 13/16" (167.2cm)
74" (188cm)
*Minimum enclosure
height maybe higher de-
pending on venting con-
figuration (See minimum
distance to combustibles
W415-1707 / 07.04.17
EN
27