Napoleon Ascent X 36 Série Manuel D'installation page 53

A1
1. Place log #1 (W135-0685) fi rmly onto A1 and
PLACE TEXT BOX HERE.
A2, ensuring the notch fi ts around the pilot
NOTE: ENSURE NOMENCLATURE IS
shield.
CONSISTENT THROUGHOUT.
3
C1
3. Place log #3 (W135-0688) fi rmly onto C1.
PLACE TEXT BOX HERE.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Notch
5
Pin
3
5. Place a pin in the hole located on the left
PLACE TEXT BOX HERE.
side of log #2. Place log #5 (W135-0690) onto
NOTE: ENSURE NOMENCLATURE IS
the pin, allowing the other end to rest in the
CONSISTENT THROUGHOUT.
notch of log #1.
Notch
1
A2
1
2
1
4
A2
B1
2. Place log #2 (W135-0686) fi rmly onto B1 and
PLACE TEXT BOX HERE.
B2. Do not cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
3
4. Place log #4 (W135-0687) fi rmly onto D1 and
PLACE TEXT BOX HERE.
D2. Ensure log #3 and log #4 are touching.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
5
3
6. Place a pin in the hole located on the right
PLACE TEXT BOX HERE.
side of log #1. Place log #6 (W135-0689) onto
NOTE: ENSURE NOMENCLATURE IS
the pin, allowing the other end to rest in the
CONSISTENT THROUGHOUT.
notch of log #4.
fi nishing
1
2
B2
1
4
D1
D2
Pin
6
1
Notch
4
W415-1849 / A / 03.06.19
EN
53