Axis Communications P13-E Série Guide D'installation page 24

Page 24
Status LED when using the Focus Assistant
LED Color
Green
Amber
Red
Status LED on housing electronics (fan/heater)
LED Color
Power Green
Flashing
green
AXIS P13-E Network Camera Series Installation Guide
Indication
Step 4: Focus Assistant is enabled
Step 6: The lens is optimally adjusted
Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is less optimally adjusted
Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is poorly adjusted
Indication
OK
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Note: Alarm events will be triggered through the camera's input port. See the
User's Manual, available on the CD provided with this product, or from
www.axis.com Contact your Axis reseller for information about spare parts and
troubleshooting.