Appliance Description
Model(s): 5520
Additional Models Discussion: None
Appliance Type: Pellet-Fired Room Heater
Air Introduction System: Air enters the burn chamber by being pulled though the firepot,
via the exhaust blower, see air flow diagram in Appendix D.
Combustion Control: Feed rate is electronically controlled via user-selectable controls.
Baffles: N/A
Flue Outlet: 3-inch exhaust outlet located on the bottom/rear of the appliance.
Appliance Dimensions
Height
34"
Appliance design drawings can be found in Appendix D submitted with the CBI copy of
this report.
Page | 9
5520 Dimensions
Width
Depth
26"
27"
Project # 19-511
Firebox
Weight
Volume
N/A – Pellet
210 lbs
Stove
Model: 5520