dji SNAIL Guide De L'utilisateur page 7

established, the software will display the connected
devices. Use your DJI account to login.
5. Click Settings to set parameters.
6. Click the firmware update and select the version
you would like to update. DJI Assistant 2 will
automatically download and update the firmware.
Restart your ESC after the update is complete.
Ensure that your computer is connected to the
Internet during the update.
Ensure that the battery level is adequate for
the update.
DO NOT unplug the USB cable during the update.
Retry update if DJI Assistant 2 displays an
update failure prompt.
If the ESC is not recognized by the DJI ESC
Assistant, check if there is more than one
FTDI device connected such as another DJI
Updater or programmer, an FTDI USB adapter
or development board (e.g. a BeagleBone,
Raspberry or Arduino board). Unplug the other
FTDI devices. Restart the DJI Assistant 2 and
the ESC, and try again.
5