Maintenance And Service; Maintenance And Cleaning - BRICK MPV2200-75 Mode D'emploi

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep the
machine and ventilation slots clean.
When the carbon brushes wear below acceptable
service tolerances, the machine will automatically
cut out. The machine must be sent to customer
service for maintenance (for address, see the
"Service and Customer Assistance" section.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for
BRICK power tools.
Guarantee
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
Environment
Should your machine need
replacement after extended use, do not
put it in the domestic waste but dispose
of it in an environmentally safe way.
2011
13